Palfinger Loader Cranes
Notice: Undefined variable: out in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 281
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
Notice: Undefined property: stdClass::$unit in /mnt/wordpress_data/fo.kj/wp-content/themes/twentyseventeen-child/template_palfinger.php on line 305
PK 7.501 SLD 5
HIGHER PAYLOAD DUE TO INTELLIGENT LIGHTWEIGHT DESIGN
- Shorter load cycle times due to High Speed Extention
- High operator friendliness thanks to radio remote control
- Maximum utilisation of the working range due to HPSC
- More lifting power due to A-HPLS
Brochures
PK 7.001 SLD 1 | PK 7.001 SLD 3 | PK 7.501 SLD 5
| Max. lifting moment | 6.8 |
| Max. lifting capacity | 3300 |
| Max. hydraulic outreach | 11.2 |
| Max. manual outreach | 12.9 |
| Slewing angle | 400° |
| Slewing torque | 0.8 |
| Stabilizer spread (std) | 3.0 m |
| Fitting space required (std) | 0.66 |
| Width folded | 2.20 |
| Max. operating pressure | 360 |
| Pump capacity | 30 - 40 l/min |
| Dead weight (std.) | 780 |
Cranes shown in the leaflet are partially optional equipped and do not always correspond to the standard version.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
Country-specific regulations must be observed. Dimensions may vary. Subject to technical changes, errors and translation mistakes.
 Lifting moment |  Outreach |  Slewing angle |  Slewing torque (mt) |  Pressure |  Pump capacity (l/min) |  Crane Weight |  Crane Height |  Crane Width |  Installation Width | Max stroke lenght | Max lifting capacity | Load vertical | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Std | 6.8 mt | 5.5 m | 400 | 0.8 | 36.0 Mpa | 30-40 | 780 kg | 1930 mm | 2200 mm | 660 mm | 5300 mm | - | 1280 kg |
| A | 6.6 mt | 7.4 m | 400 | 0.8 | 36.0 Mpa | 30-40 | 860 kg | 1930 mm | 1930 mm | 660 mm | 7200 mm | - | 890 kg |
| B | 6.4 mt | 9.3 m | 400 | 0.8 | 36.0 Mpa | 30-40 | 930 kg | 1930 mm | 2200 mm | 660 mm | 9200 mm | - | 650 kg |
| C | 6.4 mt | 11.2 m | 400 | 0.8 | 36.0 Mpa | 30-40 | 930 kg | 1930 mm | 2200 mm | 660 mm | 11100 mm | - | 480 kg |
The outreaches stated are with a boom angle of 20° and are therefore not the maximum. When using mechanical boom extensions, the loads shown on the charts need to be reduced by the weight of these extensions.
